Monday, July 08, 2013

Thorium Based Nuclear Power: A Current Commentary



The following was published in the journal Science Progress http://www.sciencereviews2000.co.uk/view/journal/science-progress, of which I am an Editor and where I write a regular "Current Commentary" column, in this issue with the view to giving some publicity to the prospects and potential advantages of deriving energy from thorium. The final article (containing figures, schemes etc.) can be downloaded from this link http://stl.publisher.ingentaconnect.com/content/stl/sciprg/2013/00000096/00000002/art00005

Thorium instead of Uranium?
It may well turn out that thorium is a better nuclear fuel than uranium, since it offers the advantages that: (1) it has around four times the abundance of uranium on Earth, overall; (2) practically 100% of it can be bred into the fissile nuclear fuel 233U; (3) smaller amounts of plutonium and other transuranic elements are produced than is the case from uranium fuel; (4) the thorium fuel cycle might be used to consume plutonium, thus reducing the nuclear stockpile, while converting it into useful energy. There was a conference held in Chicago, in May 2013, on “5th Thorium Energy Alliance – Future of Thorium, Energy and Rare Earths.” http://www.thoriumenergyalliance.com/

Thorium1 is a naturally occurring radioactive element, with the chemical symbol Th and an atomic number of 90. The mineral, now known as thorite, was discovered in 1828 by the Norwegian priest and mineralogist, Morten Thrane Esmark. In that same year, the element, thorium, was identified in the material by the Swedish chemist, Jöns Jakob Berzelius, who named it after Thor, the Norse god of thunder. Thorium is found in soils at an average concentration of 6 parts per million (p.p.m.), and in most rocks. In higher concentrations, thorium occurs in several kinds of mineral, of which the most common is the rare earth phosphate mineral, monazite, which contains up to about 12% thorium phosphate, but 6-7% as an average. World monazite resources are estimated to be of the order of 12 million tonnes, two-thirds of which are in heavy mineral sands deposits on the south coast and east coast of India. The world total of economically extractable thorium is estimated at around 2.61 million tonnes (Table 1)2, and Australia and the United States top the list with 489,000 and 400,000 tonnes of it, respectively. Norway has 132,000 tonnes of thorium, which adds to the large energy reserves of this country in terms of gas, oil and coal, not to mention hydropower, from which 99% of its electricity is generated. Other than negligible amounts of a few highly radioactive isotopes, thorium occurs exclusively as 232Th. Although 232Th is not fissile in itself, it can be converted to a fissile fuel in the form of 233U, via the absorption of slow neutrons. Hence, as is the case for 238U, 232Th is "fertile" and may be bred into a nuclear fuel, which in the former case is 239Pu. Kirk Sorensen, a major proponent for the development of thorium power http://energyfromthorium.com/, in particular in conjunction with the Liquid fluoride reactor, LFR (also called the molten salt reactor, MSR) has offered the following3, in regard to the essential differences between the two elements 232Th and 239Pu, as pertaining to their use in nuclear weapons or “dirty bombs”:

“There are several reasons why U-233 is unattractive for nuclear weapons. One is that it doesn't produce as many neutrons in fast fission as Pu-239. Another is that its properties in very fast fission (such as a nuclear detonation) are poorly understood.

But the biggest deterrent is that U-233 is inevitably contaminated with U-232 during its formation. It is highly impractical to separate them. And U-232 has a short half-life (~80 years) and a decay chain that includes the strong gamma emitter Tl-208. A few months after the U-233 is isolated from parent materials, the decay chain of U-232 begins to set up and the strong 2.3 MeV gammas of Tl-208 would irradiate the weapon, its electronics, as well as providing an easily-detected alert to the world that U-233 was present in a location.

In contrast, the alpha decay of U-235 and Pu-239 are rather easily shielded, making clandestine transport of these weapons much easier, and well as allowing long-term storage with relatively little damage to the electronics of the device. With all these drawbacks, it is not surprising that U-233 has not been utilized in operational nuclear weapons. This inherent physical resistance to proliferation is a powerful argument for the adoption of thorium as a basic nuclear energy source.”

Table 1. World sources of thorium (2007)2.
Country
Tons
% of total
Australia
489,000
19
USA
400,000
15
Turkey
344,000
13
India
319,000
12
Venezuela
300,000
12
Brazil
302,000
12
Norway
132,000
5
Egypt
100,000
4
Russia
75,000
3
Greenland
54,000
2
Canada
44,000
2
South Africa
18,000
1
Other countries
33,000
1
World total
2,610,000


Since 100% of naturally occurring thorium can be converted into nuclear fuel (233U), compared with the mere 0.7% of natural uranium that is fissile, i.e. 235U, which is enriched by centrifugation or gaseous diffusion of uranium hexafluoride (UF6), there is an obvious advantage4. Fuel for fuel, the advantage factor is around 30, in favour of thorium - since that from uranium is enriched to around 3% in 235U - but this is counterbalanced by a depletion of this isotope in the remaining material, which is generally referred to as “depleted uranium” and sometimes used in armaments and missiles. Roughly 1/3 of the power from a U-fuelled fission reactor is due to the fissioning of 239Pu, generated in situ from 238U, and so we can ascribe an overall advantage factor of ca 100 for thorium over uranium, though a value of 250 is claimed, when enrichment “losses” for 235U/238U and higher efficiencies for thorium reactors are included http://energyfromthorium.com/. It might be argued that the rest (234U has an abundance of only about 0.0055%) of the 100% of the uranium (238U) can be converted to plutonium in a similarly effective manner, but this requires fast neutrons in a fast breeder reactor: a technology with certain disadvantages, including the need to handle plutonium – a very toxic material, although there are as yet no reported casualties from it - and fears over its proliferation. Often cited too, is the potential fire hazard of pyrophoric liquid sodium, which is often used as a coolant, although helium, lead or a lead-bismuth alloy have all been proposed as alternatives. Thus, if the latter method is to be avoided, considerably more energy might be extracted from thorium than from an equivalent quantity of uranium. Even on the basis of the "known" 2.61 million tonne reserve of thorium (Table 1), a simple sum indicates that it could provide nuclear power for: [2.61 million (tonnes of thorium)/4.02 million (tonnes of uranium)] x 100 (enhancement factor in favour of Th over U) x 62 years (i.e. the current estimate based on uranium5) = ca 4,000 years. Even if we made all our electricity from thorium (currently, 13.5% of world electricity is from nuclear power), there would still be around 500 years worth, and so if governments are intent on nuclear expansion to obviate global warming, thorium may well prove advantageous.

             Ralph W. Moir and Edward Teller (dubbed6 as the “father of the ‘H’ bomb” and the real “Dr Strangelove”), made a study of thorium-based nuclear power from which they concluded that research should be reinitiated after being abandoned for more than three decades7. There is a comprehensive review published by the International Atomic Energy Agency (IAEA) on the subject of thorium-based nuclear power8.
The Thorium Age Waits in the Wings.
There are different ways in which energy might be extracted from thorium, one of which is the accelerator-driven system (ADS)9. Such accelerators need massive amounts of electricity to run them, as all particle accelerators do. As noted below, an alternative means to use thorium as a fuel is in a liquid fluoride reactor (LFR), also termed a molten salt reactor, which avoids the use of solid oxide nuclear fuels. Indeed, China has made the decision to develop an LFR-based thorium-power programme, to be active by 2020. However, the matter of thorium reactors is not straightforward. Neutrons may be produced from heavy elements by spallation, using high-current, high-energy accelerators or cyclotrons. In this process, a beam of high-energy protons (> 500 MeV) is directed at a high-atomic number target (e.g. tungsten, tantalum, depleted uranium, thorium, zirconium, lead, lead-bismuth, mercury) by which means up to one neutron can be produced per 25 MeV of the proton beam energy. A 1000 MeV beam will create 20-30 spallation neutrons per proton, to be compared with 200-210 MeV released in the fission of one nucleus of 235U or 239Pu. If the spallation target is surrounded by a blanket assembly of nuclear fuel, containing e.g. 235U or 239Pu (or 232Th which can breed to 233U), a fission reaction may be sustained, which is an ADS. Here, the spallation-neutrons cause fission in the fuel, and the process is assisted by further fission-neutrons. Since an ADS burns fuel which lacks a sufficiently large fission-to-capture ratio for neutrons to maintain a fission chain reaction, the whole assembly may be instantly turned-off, merely by shutting-off the proton beam, in contrast to inserting control rods to absorb neutrons and make the fuel assembly subcritical, as is necessary in conventional fission-reactors. The latter is often stressed as a key safety feature of an ADS, and while it is true that fission could be stopped almost instantly in an emergency, the substantially greater threat from decay heat would remain, as at Fukushima.
Thorium utilisation
To breed 232Th to 233U, a driver fuel is needed – either plutonium or enriched uranium – otherwise there are insufficient neutrons generated to keep the process going. As is the case for uranium, in order to use all of the thorium as a fuel, fast neutron reactors are required in the system. The concept9 of using an ADS, based on the 232Th—233U fuel cycle, is due to Professor Carlo Rubbia, in which the core would be mostly thorium, and located near the bottom of a tank 25 metres high, and containing around 8,000 tonnes of molten lead or lead-bismuth at a high temperature – this is the “primary coolant”, which circulates by convection around the core. A beam of high-energy protons from the accelerator, would be focussed along a beam-pipe to the spallation target, inside the core, where the spallation-neutrons enter the fuel and transmute the thorium into protactinium, the decay of which forms the fissile 233U. The neutrons also induce fission in uranium, plutonium and possibly any transuranic elements that are present, with an according release of energy. Thus, a 10 MW proton beam might produce 1500 MW of heat. This would accord with a generation of 600 MWe of electricity – allowing for the usual Carnot Cycle energy losses - some 30 MWe of which would be needed to drive the accelerator. However, existing accelerator technology can only produce a proton beam with an energy of 1 MW. A reactor of this kind is sometimes referred to as an energy amplifier. There is a U.K.-Swiss design for an accelerator-driven thorium reactor (ADTR) which has advanced to the stage of a feasibility study, and involves a 600 MWe lead-cooled fast reactor. The proposal is for a ten-year self-sustained thorium fuel cycle, using plutonium as a fission starter, with both the spallation target and the coolant being provided by molten lead. For actual power production, the accelerators would need to be increased in power by an order of magnitude, and massively in terms of reliability (so, I am told). In 2008, a study was made in Norway which compared the advantages and disadvantages of an ADS fuelled by thorium - relative to a conventional nuclear power reactor - from which it was concluded that such a system would be unlikely to be operating in the next 30 years9. I note, however, that experiments are being undertaken in Norway to evaluate the properties of a mixed thorium-uranium solid fuel http://www.world-nuclear-news.org/ENF_Thorium_test_begins_2106131.html.

An alternative technology to the ADS, is the "Liquid Fluoride Reactor" (LFR), which is described and discussed in considerable detail at http://energyfromthorium.com/, and reading this site has convinced me that the LFR may provide the best means to achieve our future nuclear energy programme. Thorium exists naturally as 232Th, which is not of itself a viable nuclear fuel. However, by absorption of relatively low energy "slow" neutrons, it is converted to protactinium10 (233Pa). The latter either decays further to 233U or captures another neutron, which converts it to the non-fissile 234U. 233Pa has a relatively long half-life of 27 days and a high cross section for neutron capture (the so-called "neutron poison"), hence, instead of undergoing a simple and fast decay to 233U, a significant fraction of the 233Pa consumes neutrons which convert it to non-fissile isotopes, so attenuating the reactor efficiency. To avoid this, the 233Pa must be extracted from the active zone of the thorium LFR, so that it may be allowed mainly to decay to 233U. In one scenario, this may be achieved by using columns of molten bismuth, with lithium dissolved in it, that are several metres high. The function of the lithium is to selectively reduce protactinium salts to metallic protactinium, which is then extracted from the molten-salt cycle, the bismuth acting mainly as a carrier (solvent). Bismuth has a low melting point (271 °C), a low vapour pressure, lithium and actinides are quite soluble in it, and it is immiscible with molten halides10. The "breeding" cycle can be initiated using plutonium, say, to provide the initial supply of neutrons, and indeed the LFR could provide an efficient way of disposing of weapons-grade plutonium and heavily-enriched uranium from the world's stockpiles, producing useful energy in the process.
The LFR makes in-situ reprocessing possible, and much more easily than is the case for solid-fuel based reactors. To date, there have been two working LFR's built11, and if implemented, the technology would avoid using uranium-plutonium fast breeder reactors, which need high energy "fast" neutrons to convert 238U, which is not fissile, to 239Pu which is. The design of the LFR is inherently safer and does not require liquid sodium as a coolant, while it also avoids the risk of plutonium getting into the hands of terrorists. I maintain my reservations about how long other resources, e.g. oil and gas will last, with which to mine and process either uranium or thorium, but if the latter appears viable in the longer run, I suggest that molten salt (liquid fluoride) reactors might provide a more viable approach than the far more complex (and as yet untested) accelerator-driven systems.

More thorium would doubtless be found if it were looked for hard enough, and so the basic raw material is not at issue. Being more abundant in most deposits than uranium, its extraction would place less pressure on other fossil fuel resources used for mining and extracting it. Indeed, thorium-generated electricity could be piped-in for that purpose. Despite these apparently impressive advantages, the new build of infrastructure would be massive, to switch over entirely to thorium, as it would be to convert to any other new technology, on the grand scale, including hydrogen and biofuels, with attendant costs of materials, energy, labour and other resources. Indeed, this provides the mass of resistance that is to be expected over the implementation of all kinds of new technology. My belief is that, once the “liquid fuels crisis” occurs, which will be the major, and most immediate, consequence of a decline in world conventional crude oil production, “peak oil”, we may be able to produce liquid fuels from coal, possibly using electricity produced from thorium. The problem of nuclear waste is expected to be lessened through the use of thorium, since fewer actinides result from its fuel cycle compared with that from uranium. It is not clear how the development of thorium energy in Europe will be funded, if at all, since much of the Euratom budget is being spent on the ITER nuclear fusion project, and the remainder on uranium-based fission programmes12.

Oak Ridge National Laboratory (ORNL) molten salt breeder reactor.
232Th, 235U and 238U are radionuclides that predate the formation of the Earth some 4.5 billion years ago, and were created in the cores of dying stars through the r-process being dispersed galactically by supernovas. Around half13 the internal heat of the Earth is produced from the decay of these radioactive elements, along with 40K, and it is this effect, unknown at the time of Lord Kelvin, that led him to conclude this planet to be much younger than it actually is, at between 20 million and 400 million years, rather than the currently accepted value of 4.54 (± 0.05) billion years14. As a result of both historical and technical factors, each of the above type of nuclide tends to be associated with different kinds of reactor: across the world, the principal nuclear fuel is 235U, as it has been since the dawn of the nuclear age, and this is usually used in light water reactors; 238U/239Pu has been used mainly in, liquid sodium cooled, fast breeder reactors and CANDU Reactors; 232Th/233U is thought best suited to fuel molten salt reactors (MSR)11.

The MSR at Oak Ridge National Laboratory was pioneered by Alvin M. Weinberg, where two prototype molten salt reactors were successfully designed, constructed and operated. These were the Aircraft Reactor Experiment in 1954 and Molten-Salt Reactor Experiment which ran between 1965 and 1969, and in both cases, liquid fluoride fuel salts were used. Fuelling with 233U and 235U was demonstrated during separate test runs. A proposed molten salt breeder reactor (MSBR) was designed at ORNL, during the period 1970-1976, with LiF-BeF2-ThF4-UF4 (in the relative proportion: 72:16:12:0.4) as its fuel, and with a graphite moderator, to be replaced every four years, with NaF-NaBF4 as the secondary coolant, and a peak operating temperature of 705 °C. However, the MSR program was closed in the early 1970s, in favour of the liquid metal fast-breeder reactor (LMFBR). Research into MSRs then lapsed in the United States, and as of 2011, the ARE and the MSRE remained the only molten-salt reactors ever operated. The MSBR project received funding until 1976, equivalent to $38.9 million from 1968 to 1976 (compensated for inflation to the monetary $ value in 1991)11.

Rare Earth Elements and Thorium Power.
Thorium is present in the ores of rare earth elements, and indeed, there is more thorium available from this source than the world demand for it15. As a consequence of its radioactive nature of thorium, a hazard is posed from its content in waste produced by the processing of rare earth oxides. However, as we have noted, thorium could be bred into a nuclear fuel and most simply used in a liquid fluoride reactor (LFR), rather than burying it underground in concrete. 97% of world market supplies of rare earth elements (REEs) come from China and look to become insecure in regard to meeting "green" energy targets, since supplies of REEs are scheduled to be retained for Chinese home energy projects. REEs are essential raw materials for the fabrication of high-performance magnets in hybrid cars and wind-turbines. The REE distribution in monazite sands is around 45 - 48 % cerium, 24% lanthanum, 17% neodymium, 5% praseodymium, along with minor quantities of samarium, gadolinium and yttrium. Europium concentrations tend to be low, in the region of 0.05%, and very low concentrations of the heaviest lanthanides in monazite accord with the term "rare" earth for these elements, with correspondingly high prices. The thorium content16 of monazite is variable and can be as high as 20 - 30 %, although commercial monazite sands typically contain 6 - 12% thorium oxide.

In January, 2013, a controversial REE processing plant was commissioned by the Australian based mining company Lynas in Malaysia17, where it is argued that environmental protection laws are less rigorous than in Australia. The plant is predicted to produce one third of global demand for REEs, hence breaking the Chinese monopoly. 

Thorium-based power: positive and negative features.
Positive aspects4.
Although precise knowledge of the true amount of reserves, globally, is limited, thorium is estimated to be about 3-4 times more abundant than uranium in the Earth's crust. Very likely, further sources of the material would be found, if they were sought with sufficient assiduousness, noting that the EROEI would fall with the decreasing grade (thorium content) of particular ores. Current demand for thorium (mostly not for power generation) has been satisfied as a by-product of rare-earth extraction from monazite sands, but demand for the metal is relatively low in comparison with that for REEs, so that the thorium ends-up as radioactive waste from processing this mineral. Since thorium consists of a single isotope (232Th), it can be employed in thermal reactors without requiring isotope separation, unlike natural uranium, from which the fissile 235U must be separated and enriched for use as a nuclear fuel in fission-reactors.

Relative to uranium-based fuels, thorium offers a number of appealing features: the thermal neutron absorption cross section (σa) is about three times, and the resonance integral (average of neutron cross sections over intermediate neutron energies) about one third for 232Th of the respective values for 238U, meaning that the conversion of thorium is more efficient in a thermal reactor. Although the thermal neutron fission cross section (σf) of the resulting 233U is comparable to 235U and 239Pu, it has a much lower capture cross section (σγ) than the latter two fissile isotopes, providing fewer non-fissile neutron absorptions and a better neutron economy. Finally, the ratio of neutrons released per neutron absorbed (η) in 233U is > 2, and over a wide range of energies, which covers the thermal spectrum, meaning that thorium-based fuels might be used in a thermal breeder reactor.

Because the 233U produced in thorium fuels is always contaminated with 232U, thorium-based nuclear fuel has an inherent proliferation resistance. 232U cannot be separated from 233U by chemical means, and it has several decay products which emit high energy gamma radiation, alerting to the presence of such materials, e.g. “a bomb in a suitcase”. 233U can be denatured by mixing it with natural or depleted uranium, meaning that before it could be used in nuclear weapons, isotopic separation would be necessary.

On a timescale, roughly of 103 to 106 years, the radiological hazard of conventional uranium-based used nuclear fuel is dominated by plutonium and other minor actinides, but once these have decayed, long-lived fission products once more make a significant contribution. A single neutron capture in 238U is sufficient to produce transuranic elements, whereas six such captures are generally necessary to so convert 232Th. 98–99% of the nuclei in the thorium-cycle fuel would fission either at the 233U or 235U stage, thus resulting in fewer long-lived transuranics. As a result, in mixed oxide (MOX) fuels, thorium offers an advantage over uranium, in minimising the generation of transuranics while maximising the destruction of plutonium.

The advantages of thorium in nuclear waste management, while noting that it produces far less in the way of transuranics, are mitigated by the production of 231Pa. also an α-emitting actinide, with a half-life of 3.3 x 104 years, along with the full range of fission products. It is the presence of the latter, more than their amounts, this is the problem. Indeed, the chemical intractability of thorium oxide makes it a good waste form in its own right, although it does almost preclude volume reduction by separating the few percent of genuine waste from unused material. That said, direct disposal eliminates the plant and secondary waste production incurred in such separation, which naturally is equally available for uranium.

Negative aspects4.
The application of thorium as a nuclear fuel poses a number of problems, particularly for solid fuel reactors. Since natural thorium contains no fissile isotopes, it is necessary to add fissile material 233U, 235U, or plutonium, in order to attain criticality. Along with the high sintering temperature necessary to make thorium-dioxide fuel, this is a complicating factor in fuel fabrication. ORNL experimented11 with thorium tetrafluoride as a fuel component, in their run of a molten salt reactor from 1964–1969, which was far easier both to process and to separate from contaminants, which slow-down or actually halt the chain reaction.

In an open fuel cycle (using 233U in situ), a higher burn-up is necessary to achieve a favourable neutron economy. Although thorium dioxide performed well at burn-ups of 170,000 MWd/t and 150,000 MWd/t at Fort St. Vrain Generating Station http://en.wikipedia.org/wiki/Fort_St._Vrain_Generating_Station  and AVR http://en.wikipedia.org/wiki/AVR_reactor respectively, achieving this in light water reactors (LWR), which are the vast majority of existing power reactors, worldwide, is a challenge. In a once-through thorium fuel cycle, the residual 233U constitutes long-lived radioactive waste.

The main objection on the part of the nuclear industry to thorium is its radiotoxicity, greater by an order of magnitude than that of uranium, in consequence of the presence of 232U and decay products, therefrom. Thus, a completely new infrastructure would be required, involving more stringent dust control.

The thorium fuel cycle requires a relatively long interval to breed 232Th to 233U. The half-life of 233Pa is about 27 days, which is an order of magnitude longer than the half-life of 239Np, as occurs in breeding from 238U to 239Pu. As a result, substantial quantities of 233Pa, which is an effective absorber of neutrons, build up in thorium-based fuels. Thus, instead of undergoing a simple and fast decay to 233U, a significant fraction of 233Pa consumes neutrons which convert it to non-fissile isotopes, e.g. 234Pa, and this attenuates the reactor efficiency. Therefore, the 233Pa must be extracted from the active zone of the thorium LFR, so that it may be allowed mainly to decay to 233U. Eventually, the 233Pa would breed into fissile 235U, but this process requires overall two more neutron absorptions, and hence occurs at the further expense of the neutron economy. The likelihood of transuranic production is also increased.

Although the presence of 232U would inhibit its use in a nuclear weapon, 233U was once so employed, as part of a bomb core in the MET blast during “Operation Teapot” in 1955, though the energy yield was appreciably less than had been anticipated. 

Current thorium projects18.
Research and development of thorium-based nuclear reactors, primarily the Liquid fluoride thorium reactor (LFTR), MSR design, has been or is currently ongoing18 in the U.S., U.K., Germany, Brazil, India, China, France, the Czech Republic, Japan, Russia, Canada, Israel and the Netherlands.
  • China. Using components produced by the West and Russia, it was reported early in 2012 that China planned to build two prototype thorium molten salt reactors by 2015. A budget for the project was established at $400 million, which will require 400 workers. China has also finalized an agreement with a Canadian nuclear technology company to develop improved CANDU reactors using thorium and uranium as a fuel.
  • India. This is the "only country in the world with a detailed, funded, government-approved plan" to focus on thorium-based nuclear power. In late June, 2012, India announced that their "first commercial fast reactor" was near completion and would rely on thorium for its fuel. The nation plans to develop up to 62, mostly thorium-based reactors, intended to be fully operational by 2025.
  • Norway. In Norway, the privately-owned company, Thor Energy, announced in late 2012, that in collaboration with the government and Westinghouse, it will start a 4-year long trial to employ thorium as a nuclear fuel in one of its existing nuclear reactors.
  • U.S. In its report to the Secretary of Energy, in January 2012, the Blue Ribbon Commission on America's Future notes that a "molten-salt reactor using thorium [has] also been proposed”, while in the same month, it was stated the U.S. Department of Energy is "quietly collaborating with China" on a molten salt reactor using thorium fuel.

  • Japan. In the aftermath of three meltdowns at nuclear power plants in 2011, Japan utility Chubu Electric Power, wrote in June, 2012, that they are considering thorium as “one of future possible energy resources.”
  • Israel. Researchers from Ben-Gurion University in Israel and Brookhaven National Laboratory in New York began, in May 2010, a collaboration to develop self-sustaining thorium reactors, "meaning one that will produce and consume about the same amounts of fuel."
  • U.K. In Britain, a member of the House of Lords, Bryony Worthington, is actively promoting thorium, which she refers to as “the forgotten fuel”. However, the UK’s National Nuclear Laboratory (NNL) has published a paper on the thorium fuel cycle, finding that, "the thorium fuel cycle does not currently have a role to play," in that it is "technically immature," and “would require a significant financial investment and risk without clear benefits," and which are "overstated." The environmental group, Friends of the Earth UK, are of the opinion that research into thorium-based power might be "useful" as a fallback option.
References.
(1) http://en.wikipedia.org/wiki/Thorium
(2) Data taken from Uranium 2007: Resources, Production and Demand, Nuclear Energy Agency (June 2008), NEA#6345 (ISBN 9789264047662). The 2009 figures are largely unchanged. Australian data from Thorium, in Australian Atlas of Minerals Resources, Mines & Processing Centres, Geoscience Australia
(3) http://ergobalance.blogspot.co.uk/2006/06/thorium-instead-of-uranium.html.
(4) http://en.wikipedia.org/wiki/Thorium_fuel_cycle
(5) http://en.wikipedia.org/wiki/Peak_uranium
(6) http://nucleargreen.blogspot.co.uk/2008/03/edward-teller-listens-as-eugene-weigner.html
(7) http://pbadupws.nrc.gov/docs/ML0930/ML093090346.pdf
(8) http://www-pub.iaea.org/MTCD/publications/PDF/TE_1450_web.pdf.
(9) http://www.world-nuclear.org/info/Current-and-Future-Generation/Accelerator-driven-Nuclear-Energy/#.UVA32VevPRk.
(10) http://en.wikipedia.org/wiki/Protactinium
(11) http://en.wikipedia.org/wiki/Molten_salt_reactor#Oak_Ridge_National_Laboratory_molten_salt_breeder_reactor
(12) http://blogs.telegraph.co.uk/finance/ambroseevans-pritchard/100022190/last-chance-to-protest-before-the-eu-snuffs-out-thorium-energy-in-europe/
(13) http://news.sciencemag.org/sciencenow/2011/07/earth-still-retains-much-of-its-.html,
(14) http://en.wikipedia.org/wiki/Age_of_the_Earth.
(15) http://www.the-weinberg-foundation.org/2012/11/20/how-to-manage-the-dirty-side-of-thorium-and-assure-its-global-supply/
(16) http://www.world-nuclear.org/info/Current-and-Future-Generation/Thorium/#.UVGnXlevPRk
(17) http://www.miningaustralia.com.au/news/lynas-ramps-up-rare-earth-processing-in-malaysia
(18) http://en.wikipedia.org/wiki/Thorium-based_nuclear_power#World_sources_of_thorium

10 comments:

Osk Archer said...

Dr Rhodes, I very much enjoyed your post, what amounts to a technical summary for Thorium energy, MSR in particular. It is refreshing to read someone else embracing the potential of this technology from the perspective of the threat of Peak Oil.

I have also approached the science as a chemist, though with far less experience than you - I wonder what you think might be the call for chemistry in support of the adoption of Thorium nuclear power into the near-mid future?

Professor Chris Rhodes said...

I think that much of the basic chemistry has already been worked out. So, the challenge to chemists/chemical engineers is in the fabrication of MSR devices. In the post peak oil era, we will need our chemists, but also engineers of all kinds, and practically trained people, carpenters, plumbers, bricklayers and so on.

I gave a talk on this subject at the Swindon (U.K.) Festival of Literature in May, which you can watch on YouTube, if you click on the "Available for talks" link at the top of my blog. Here I discuss what exactly we will need from our universities and education system in general, in the near to mid future.

I would be interested to know what your own views are, though admittedly the subject in its entirety is a complex one.

Very best wishes,

Chris

Robert Steinhaus said...

I would like to congratulate the author on a very fine comprehensive article on Thorium.

The author of the article suggests -
" 233U produced in thorium fuels is always contaminated with 232U" which is certainly true enough. It is probably worthwhile to note that there is a chemical process worked out by ORNL for removing U-232 decay daughters that produce most of the penetrating gamma radiation hazard on a temporary basis of ~3 week that permits heavily U-232 contaminated U-233 to be relatively safely machined.
ORNL-4731 “LABORATORY DEVELOPMENT OF A PRESSURIZEDCATION EXCHANGE PROCESS
FOR REMOVING THE DAUGHTERS OF 232U FROM 233U”
By R. H. Rainey
http://www.osti.gov/bridge/servlets/purl/4593331-l7eKHE/

The existence of this process may impact, to some degree, arguments regarding U-232 contaminated U-233 and proliferation considerations.

Professor Chris Rhodes said...

Dear Robert,

thanks very much for this useful information.

Regards,

Chris

Ed Pheil said...

I haven't done the calculations, but if the 232U primarily comes from 233U(n,2n)232U, then it is fairly easy to chemically get pure 233U. With regard to getting rid of 232U from 233U, I am sure there is a process for chemically separating 233Pa from everything else. If this separated 233Pa decays, it becomes pure 233U with no 232U contamination.

With regard to the thorium article, the reactor gives you most of the benefits, not the thorium. That is the nice thing about the reactor is is very fuel flexible.

Professor Chris Rhodes said...

With regard to the LFR, it is indeed a very flexible creature... and in addition, there are potential advantages per se of thorium as a fuel, over uranium. This should not be overlooked. Not a trivial matter to get rid of the 232U: it takes processing and energy, so this rider still pertains. I hope that I have given due balance to all these matters.

Anonymous said...

Thorium Power Canada is also claiming to be in regulatory process for selling two prototype modular thorium reactors, a 25 MWe one for Indonesia and a 10MWe one for Chile. Have you heard anything about them? If their claims are true, they will win the race to having designed the first reactor designed to run solely on thorium fuel (once seeded, will be self-breeding). They claim their reactor is construction ready and has a build time of 18-24 months.

TPC bought out DPI out of California. It uses uranium as an initial seed fuel and gas as its coolant, and uses the mix of old and new fuel as well as control rods to regulate the rate of fission. From what I gather the fuel is in the form of ceramic clad pellets and a working prototype has not yet been built. More shall be revealed?

Professor Chris Rhodes said...

All that I know about this is from reading this article:

http://nextbigfuture.com/2013/07/thorium-power-canada-is-in-advanced.html

Undoubtedly there will be "proprietary" limitations to revealing how exactly their reactor works, but the applications mentioned, e.g. desalination, would be of great significance.

But from what you say, it's not a molten salt (liquid fluoride) reactor, which is a technology that might still come into play in the future.

Indeed, we will watch this space!

Unknown said...

Kitchen Taps are elegant fixtures in the bathroom that increase water pressure, which in turn increases the speed. Basin Taps have emerged as a necessity among today urban population and different types of Bathroom Sink Taps are being launched to suit individual needs. Shower heads allow users to adjust from delicate to fast sprays. Bathtub Taps are designed to mix and match almost an infinite combination of variations. Bathtub Taps bring luxury and convenience to any bathroom. Modern Antique Kitchen Taps push the water through an accelerator fin that powers up and increases the water velocity. The result is a highly boosted flow of Automatic Taps

Unknown said...
This comment has been removed by the author.